Arts Project Topics

Provision of a Two-shaft Table Loom Applied to the Creation of Contemporary Male Apparels.

Provision of a Two-shaft Table Loom Applied to the Creation of Contemporary Male Apparels.

Provision of a Two-shaft Table Loom Applied to the Creation of Contemporary Male Apparels.

CHAPYTER ONE

Objectives of the Study

 The main objective of this project is providing a two-shaft table loom to the Department of Fine and Applied Arts University of Benin for the production of woven fabrics.

The project is aimed a adding a new Two – shaft table loom to the available ones in the Department of Fine And Applied Arts University of Benin for the students to work with in order to reduce the stress inadequate loom for both students and the lecturers.

The specific objectives are to:

  1. Provide a two-shaft table loom.
  2. Produce woven fabrics of chosen colours using the
  3. Adapt the woven fabrics for the creation of contemporary male

CHAPTER TWO

REVIEW OF RELATED LITERATURE

The chapter is about getting information from books, journals, magazines, internet, oral interviews, discussion etcetera that are relevant to the project.

It has been discussed based on the following sub-headings:

  • Definition of Loom
  • Types of Loom
  • Definition of Weaving
  • History of Weaving
  • Types of Weaving

Definition of Loom 

A loom is a machine used in weaving fabrics from yarn or other fibres. A woven fabric produced on a loom is made by interlacing two sets of threads at right angles. The longitudinal threads are called the warp, and the transverse threads are called the weft otherwise known as filling. Microsoft Encarta 2009.

 

CHAPTER THREE

EQUIPMENT, TOOLS, MATERIALS AND METHOD

This chapter gives a detailed account of the step by step activity that was carried out in order to actualise this project. This chapter also explains the method used in carrying out this project. The materials, tools and equipment used in this project are listed below.

CHAPTER FOUR

DESCRIPTIVE ANALYSIS OF THE PROJECT AND END-USE

This chapter describes the woven fabric weaving and discusses the end use with visuals for the purpose of clarity.

Weaving Preparation

Before embarking on weaving, certain things must be put in place.

  1. NOTE: Before anything, your loom must be ready and in a good condition.
  2. The accessories must be intact because if anyone should get missing, it may lead to delay and in most cases stop the whole idea of weaving.
  3. The materials must be ready as listed in chapter 3 of this
  4. There must be a warping mill.

Step 1: Locate your warping mill and tie your warp thread to the warping mill. Take it down and take it up in a reversed manner to create a cross between the warp threads. This will make the thread flow up and down.

Reason: This cross is what will help the weft thread to interlace with the warp thread when weaving starts. Next is the insertion of shed sticks

CHAPTER FIVE

Conclusion

 In a bid to solve the problem of insufficient facilities in the Department of Fine and Applied Arts University of Benin the research came about. Therefore the research is about the provision of a two-shaft table loom to the students of the department. Loom is a necessity in this department especially to textile students and lecturers because it aids learning process and also help lecturers to teach without stress and students will also be able to practice what they have learnt in class. Moreover, this researcher also went into production of contemporary male apparel with the woven fabric gotten from the loom. Weaving is an aspect of art that should be embraced because of its numerous advantages so I recommend this research project for students who want to delve into Art and even those who are already in the art community. It is my hope that this attempt would be appreciated by students of this department as this would enhance their academic and personal skills.

Nevertheless, any suggestion to make this project a better one would be highly appreciated.

REFERENCES

  • Eicher J. B, (1976). Nigerian Hand Crafted Textiles. University of Ife Press, Ile Ife Nigeria
  • Osaigbovo, T. U. (2014). An Exploration in Warp and Weft Colour Alignments for Weight Reduction of Nigerian Traditional Woven Fabrics. A Ph.D thesis submitted to the Department of Fine & Applied Arts, Delta State University, Abraka, Delta State. Nigeria.
  • Microsoft Encarta 2009.
  • Wikipedia 2015.
WeCreativez WhatsApp Support
Our customer support team is here to answer your questions. Ask us anything!